/ USD
Looking for a server for Wanguard console? You will find ready kits here that simply work. Built on Dell PowerEdge platform, with fast SSD, RAID controller, redundant power supply and iDRAC included. Ready for installation in a cabinet, tested for compatibility.
Servers for Wanguard console – ready kits that require no improvisation
If you are planning an Andrisoft Wanguard deployment, you know perfectly well that most problems arise not from the software itself, but from the hardware: mismatched components, lack of RAID controller, uncertain drive compatibility or lack of iDRAC access.
In this category you don't need to select anything – these are "rack-ready" kits, built specifically for Wanguard management consoles. All three configurations – PowerEdge R340, R350 and R640 – feature two fast 480 GB SSD drives (2.5" SATA) for system and application, plus – depending on the model – additional 8 TB SAS drives (3.5") for data.
You receive as standard redundant power supplies (2x PSU), mounting rails, bezel, iDRAC 9 and full access to BIOS and remote management. All of this with full compliance with Andrisoft hardware requirements – both in terms of CPU, RAM, and disk or network interfaces. Most importantly? Equipment available immediately, covered by 36-month warranty, ready to work here and now – without costly configurations, without uncertainty.
R640, R350 or R340? Check which Wanguard server for console fits your scale
Depending on traffic volume, number of rules or planned Wanguard integration with SIEM system or NetFlow – you can choose one of three sensibly built configurations. If you are launching a small environment with a basic console, PowerEdge R340 with Xeon E-2224, 32 GB RAM and 2×480 GB SSD will be sufficient – economical, quiet, and fully professional. When you need more space and more stable disk operation (e.g., when storing logs, flows or analysis data), it's worth considering R350 with additional 2×8 TB SAS drives and H355 RAID controller.
The highest performance in this class is provided by PowerEdge R640 with Xeon Silver 4110 (8C), 64 GB RAM and H730P controller – equipment that will easily handle multiple SNMP sessions, NetFlow, sFlow or integration with other security components. Importantly – each of these units has been tested by our engineers for compatibility with Wanguard, which means zero risk on the buyer's side. You buy a ready kit – not a "guess" with ports, drivers and RAID compatibility.
Looking for a secure server for Wanguard console? See what you get as standard
Usually a server for a network management system requires purchasing a lot of add-ons – mounting rails, bezel, second power supply, iDRAC license or compatible drives. In this category you don't need to worry about anything – everything you need is included. The offered Dell PowerEdge units feature sliding rail type mounting rails, front bezel, full iDRAC 9 access, as well as redundant 2x PSU power supplies, which guarantee continuous operation even if one power path fails.
In an environment where Wanguard acts as a security layer – this is a critical matter. Additionally, thanks to compact size (43.5"), servers will fit even in 600 mm cabinets, and the chassis itself allows convenient hot-swap drive replacement. Each configuration uses DDR4 ECC memory (RDIMM or UDIMM), and SSD and SAS drives are fully compatible with RAID controllers (H730P or H355). You don't need to commission compatibility tests – everything has already been checked.
Add to this 3-year warranty, real technical support and access to an advisor who doesn't read from a sheet – someone who has actually configured servers for security and ISP customers.
Not just hardware – real advice, fast delivery and startup configuration
Hardware Direct is not a store that just sells servers. It's a team of people who advise based on real deployments – in operator networks, in public institutions, in production SOC and NOC environments. When you buy a Wanguard console server here, you can count on something more than a good kit. If you need it, we will prepare a startup RAID configuration for you, check ports and BIOS, and even match a network card or iDRAC license to your requirements.
You can always write – we will respond in a human way, without pushing sales. Delivery? Servers are physically in stock – 4 to 8 units of each model – and we usually complete shipments within 24-48 hours. Plus clear invoice, documentation, launch support. And most importantly – if you're unsure about something, it's better to ask. We don't sell blindly. We help select equipment that will not only "work", but will work long, stably and without stress.